🚚 Tracked delivery · Arrives in 7–15 business days
🎁 Buy 2, save 10% · Buy 3, save 15% — applied automatically at checkout
Broken Pipe Extractor Tool — for 1/2in, 3/4in and 1in (DN15/20/25) Fittings
An extractor for removing the broken threaded remains of a pipe or angle valve from a fitting, without damaging the female thread. Use it by hand or in a drill.
Key Features
Sizes: 1/2in, 3/4in, 1in (DN15, DN20, DN25)
Works by hand or in a drill
Reverse-cutting extractor
Please read
Check the size against your fitting before ordering.
Turn the water off at the stopcock and drain the line down before you start.
Go slowly and squarely. An extractor that snaps inside a fitting is far harder to remove than the original broken pipe, and hardened extractor steel cannot be drilled out.
Penetrating oil and a little heat help. Do not use heat near plastic pipe or seals.
Wear eye protection, and check the thread is clean and undamaged before you fit a new valve.
