Gimbal motor test tool, and separately a used empty gimbal, for the Mini 3 and Mini 3 Pro.
Gimbal motor test tool
Tests connection and continuity of the Mini 3 / Mini 3 Pro yaw, roll and pitch motors
Tests the Hall sensor and the coil
To test a motor on its own, the motor must still have its magnet ring fitted
You can also connect a whole gimbal to the ESC connector and test all the motors together
Turn the motor by hand: a flashing Hall light and a lit coil light are normal
Empty gimbal option
This part is used — removed from another drone, in good condition. It is not new.
Please read before ordering
Check which option you are ordering — the test tool and the empty gimbal are different items at different prices.
Compatible with the Mini 3 and Mini 3 Pro only.
Aftermarket / salvaged parts. The model names identify only the drones they suit. Fitting a third-party or used part will normally void any remaining warranty.
Gimbal repair is fiddly work with fragile flex cables. If you are not experienced with drone repair, use a service centre.
Disconnect and remove the battery before opening the aircraft.
received with broken gimbal cable, sloppy glue and bad motor. i only needed the cage so i swapped all the old motors and cable into the new cage. what a waste of time.
