Bottom plate: 3.0mm; middle plate 3.0mm; top plate 2.0mm
Arm thickness: 6.0mm; connecting plate 2.0mm; camera side plate 2.5mm
Camera mounting: 19mm
VTX and flight controller mounting: 20x20mm and 30.5x30.5mm
Internal height: 35mm
Motor mounting: 16x16mm and 19x19mm
MAK4 V2 8 inch
Wheelbase: 367mm
Weight: about 214g
Bottom plate: 3mm; top plate 2mm; camera arm 6mm
A bare frame kit — motors, ESC, flight controller, camera, VTX, propellers, battery and receiver are not included. Check the drone registration and flying rules where you live before building.
