Metal Repair Adhesive Kit, 100 g - Two-Part Glue for Iron and Steel

A two-part metal repair adhesive for cracks, pinholes and weeping seams in cast iron, steel and iron pipework - the sort of repair where welding is not practical and the part cannot easily be taken out.

Key features

• Four-piece kit: 100 g of two-part adhesive, mixing nozzles, a scraper and sandpaper
• Mixes and applies by hand, with no heat and no welding gear
• Sets hard, and can be sanded and filed back once cured
• For castings, steel tanks, iron pipes and machine housings
• Everything needed for the repair is in the box

• Adhesive weight: 100 g
• Type: two-part (A and B) repair adhesive
• Included: adhesive, mixing nozzles, scraper, sandpaper
• For iron, steel and cast metal

How to use it

Sand the area back to clean bare metal and degrease it - the bond is only as good as the surface underneath. Mix the two parts thoroughly, press the adhesive well into the crack, and leave it undisturbed to cure. Cure time is longer in cold conditions. Sand or file it flush once it is fully hard.

Safety

Use in a ventilated space. Wear gloves and eye protection — two-part adhesives irritate skin and eyes. Avoid breathing the fumes. This is a repair adhesive, not a structural weld replacement — do not use it on anything load-bearing, pressurised beyond its rating, or safety-critical. Keep away from heat and flame while curing. Keep out of reach of children.